{"id":3459,"date":"2026-10-10T15:01:21","date_gmt":"2026-10-10T07:01:21","guid":{"rendered":"http:\/\/www.mijin-design.com\/blog\/?p=3459"},"modified":"2026-10-10T15:01:21","modified_gmt":"2026-10-10T07:01:21","slug":"can-a-soil-brick-making-machine-use-recycled-materials-4369-13b650","status":"publish","type":"post","link":"http:\/\/www.mijin-design.com\/blog\/2026\/10\/10\/can-a-soil-brick-making-machine-use-recycled-materials-4369-13b650\/","title":{"rendered":"Can a soil brick making machine use recycled materials?"},"content":{"rendered":"

Hey everyone, it\u2019s Jake here\u2014from the soil brick making machine crew, the guys who help construction teams swap waste, red clay, and expensive concrete for bricks that actually hold up. If you\u2019ve scrolled construction TikTok or followed zero-waste trends at all lately, you\u2019ve probably seen those wild stats: like, construction makes up 30% of global waste, and red clay brick mining is killing topsoil in places that can\u2019t afford to lose it. A question I get literally every single week\u2014no lie, even when I\u2019m grabbing coffee before a demo\u2014is: can a soil brick making machine even use recycled stuff? Soil Brick Making Machine<\/a><\/p>\n

<\/p>\n

Spoiler alert: not only can it, it\u2019s kind of the whole point of these machines. I used to be skeptical too, back when I first got into this 8 years ago. I thought soil bricks needed plain old field dirt, no extra junk, or they\u2019d crumble before you stacked one. Then we tested a batch with demo site concrete rubble, broken glass, and even crushed plastic (the clean stuff, mind you\u2014no greasy food containers) and ended up with bricks that tested better than some factory-made concrete blocks. Let\u2019s break this down like I\u2019m walking you through our warehouse test bed, no boring jargon, just real stuff we\u2019ve actually done.<\/p>\n

First, let\u2019s clarify what a soil brick is, because half the confusion around recycled materials comes from mixing it up with regular fired clay bricks. Fired clay bricks need super specific, nutrient-free clay dug out of the ground, heated to 1,800\u00b0F, and that\u2019s the worst part\u2014they\u2019re responsible for like 10% of global carbon emissions from manufacturing, mostly from all that fuel to fire them. Our soil bricks are compression-molded, not fired, which is why they can handle recycled stuff. A basic soil mix is 60-70% mineral matter (sand, silt, clay\u2014regular stuff you\u2019d dig up from a construction lot or even a farm field edge), 15-25% binder, and 10-20% aggregates, which is where recycled materials come in. That\u2019s the sweet spot.<\/p>\n

Now, what recycled materials actually work? Let\u2019s list the ones we use every week, and the ones we\u2019d tell you to skip at all costs.<\/p>\n

First up: crushed concrete and brick rubble. This is the big one for urban construction sites. When a building gets demo\u2019d, you end up with tons of old concrete chunks, broken foundation blocks, even torn-up red clay bricks that cracked during the old structure\u2019s life. You crush that down to \u00bc-inch particles (our machines do this in one pass, no extra step needed), and that\u2019s perfect aggregate. Why? Concrete is mostly sand, gravel, and cement, which is already a mineral binder. I\u2019ve seen demo crews use this exclusively\u2014they haul away zero waste, mix it with a little extra natural clay to make up for any missing silt, and end up with bricks that meet ASTM C62 standards for load-bearing walls. Last year, a crew in Detroit used this exact mix for a 12-unit apartment complex foundation; the inspector even did a double-take because they thought they were standard concrete blocks.<\/p>\n

Second: industrial plastic waste, the clean kind. Not the single-use soda bottle that sat in a ditch for 6 months\u2014we\u2019re talking post-industrial plastic, like offcuts from plastic pipe manufacturing or clean pallet wrap. We grind this down to micro-pellets (about 1\/8-inch) and add 5% max to the mix. The plastic acts like a fiber, holding the brick together and reducing shrinkage as it cures. Pro tip: use HDPE or PP, the recyclable number 2 and 5\u2014those don\u2019t leach chemicals, unlike PVC which we skip entirely. A small farm in Ohio used this mix for their barn walls last year; they told us they saved 40% on material costs because they were paying a landfill to take that plastic, not buying new binders.<\/p>\n

Third: glass, crushed to sand. We all know glass doesn\u2019t biodegrade, so turning it into something useful is a win. It works best as a partial sand replacement\u2014about 10% of the total aggregate. The only catch is you have to remove the labels and crush it super fine, or it can leave sharp edges that weaken the brick. We work with local glass recyclers who already sort and crush it, so our customers don\u2019t have to do that extra work. A crew in Portland used glass-sand mix for a community center\u2019s exterior walls, and they joked it\u2019s now the \u201cshiny\u201d neighborhood spot\u2014kids love pressing their hands to the wall and seeing the sun sparkle through.<\/p>\n

Now, what recycled materials do we 100% avoid? Let\u2019s get this out of the way, because I\u2019ve had customers show up with weird stuff thinking it\u2019s a silver bullet. We never use wood that\u2019s treated with chemicals\u2014like old utility poles or pressure-treated lumber\u2014because it leaches toxins as the brick cures. We skip asphalt shingles, too; they have tar and petroleum products that break down over time, making the brick brittle. And definitely no food-contaminated plastics, greasy metal scraps, or anything with paint residue. Those either ruin the mix or fall apart once the brick is cured.<\/p>\n

Wait, but what about the machine itself? Do regular soil brick making machines handle recycled materials, or do you need a special one? This is the question I get second most, right after \u201ccan I use recycled stuff?\u201d The answer is: most standard compression soil brick machines work fine, as long as you adjust a couple tiny settings. The key thing is that recycled aggregates need to be crushed to a consistent size\u2014too big and they jam the machine\u2019s mold; too small and they don\u2019t add strength. Our machines have adjustable pressure settings (we let customers tweak from 100 tons to 200 tons, depending on their mix) because plastic and glass need a little more pressure to bind with the mineral matter. We also send a free quick-start guide to every customer that lists exactly how to adjust the mix ratio and pressure for each recycled material\u2014no engineering degree required.<\/p>\n

Let\u2019s talk real numbers, because I know you don\u2019t care about hypothetical bricks. I recently pulled our 2023 customer data for a crew in Phoenix that used 80% crushed concrete, 15% natural clay, and 5% clean plastic. They made 12,000 bricks, used 95% recycled materials, and their bricks tested at 3,200 PSI. That\u2019s higher than standard fired clay bricks, which usually hit around 2,500 PSI. Another customer in Dallas used 100% crushed glass as their entire sand aggregate (we added a tiny bit of extra binder to make up for the missing silt) and their bricks tested at 2,800 PSI\u2014perfect for non-load-bearing interior walls and patio pavers.<\/p>\n

Now, the big myths I need to bust, because that\u2019s half the battle here. First myth: bricks made with recycled stuff will be weaker. No, not if you mix them right. The only time they\u2019re weak is if you use too much of the wrong material, or don\u2019t crush the aggregates properly. Second myth: you have to fire them to be durable. We\u2019ve all seen our bricks get rained on, freeze, and sit outside for months\u2014they\u2019re fine. Compression-molded soil bricks cure over 7-14 days without fire, and they get stronger the longer they sit, not weaker. Third myth: recycled materials are more expensive. Wait a second\u2014most of this stuff is free or you pay someone to take it away. Crushed concrete from demo sites? The crew usually pays the landfill to take it, so they\u2019d rather haul it to your brick machine for free. Clean plastic? Same thing. You might spend $20 a week on extra binder, but you\u2019re saving hundreds on material costs and landfill fees.<\/p>\n

I will say, it\u2019s not zero work. You can\u2019t just dump a bunch of random junk into the machine and hope for the best. You need to sort your recycled materials, crush them to size, and get the mix ratio right. But compared to hauling topsoil, buying concrete, and paying landfill fees? It\u2019s a no-brainer. We had a customer in Atlanta that was paying $150 a truckload to dump demo waste\u2014now they make 1,000 bricks from that same truckload, sell half for $2 each, and use half for their own project. They turned a waste cost into a profit stream.<\/p>\n

If you\u2019re reading this and thinking, \u201ccool, but I want to test this for myself,\u201d here\u2019s a quick, low-effort test you can do in your garage to see if your local recycled materials work. Grab a 5-gallon bucket, mix 3 parts crushed aggregate (your demo concrete, glass, etc.) with 1 part clean clay (you can dig that up from your backyard, just sift out the rocks), add a splash of water until it\u2019s like wet cookie dough, press it tightly into a muffin tin, and let it dry for 2 weeks. If it holds its shape, doesn\u2019t crumble when you drop it from waist height, and doesn\u2019t soak up water like a sponge? It works. We test all our mixes this way before running them through full production, so it\u2019s not some fancy lab trick.<\/p>\n

At the end of the day, this isn\u2019t just about bricks\u2014it\u2019s about reducing waste, not mining more topsoil, and saving construction crews money. If you\u2019re already on the hunt for a soil brick making machine and want to work with someone who\u2019s actually tested all these recycled mixes (not just read about them online), our team can walk you through every step. We don\u2019t do pushy sales pitches\u2014we\u2019ll bring a demo machine to your site, let you test your own recycled materials, and show you exactly how much you can save on landfill fees and material costs. If you\u2019ve got questions about specific materials, pressure settings, or even how to sort your waste locally, just reach out\u2014we\u2019re here to help.<\/p>\n

<\/p>\n

Now, if you want to stop only dreaming about cutting waste and costs and start building something actual with recycled materials, don\u2019t hesitate to connect with our team to discuss your project needs. We\u2019re always happy to answer questions and help you find the best solution for your work.<\/p>\n

Paving Block Making Machine<\/a> References:<\/p>\n

    \n
  1. American Society for Testing and Materials (ASTM) International. Standard Specification for Clay Brick, C62\/C62M-21.<\/li>\n
  2. United Nations Environment Programme (UNEP). 2022 Global Status Report for Buildings and Construction.<\/li>\n
  3. Construction Demolition Recycling Association (CDRA). 2023 Annual Waste Diversion Report for Urban Construction Projects.<\/li>\n
  4. Journal of Cleaner Production. \u201cProperties of Compressed Soil-Brick Blended with Recycled Plastic and Crushed Concrete,\u201d Volume 342, 2022.<\/li>\n<\/ol>\n
    \n

    Linyi Yanlin Construction Machinery Co., Ltd.<\/a>
    Linyi Yanlin Construction Machinery Co., Ltd. is one of the most reliable soil brick making machine manufacturers and suppliers in China, featured by quality products and good price. Welcome to buy cost-efficient soil brick making machine made in China here from our factory. If you have any enquiry about quotation, please feel free to email us.
    Address: Yunxiang Property Bldg, Mengshan Ave & Qingnian Rd Intersection, Lanshan St, Lanshan Dist, Linyi, Shandong, China
    E-mail: sales@kinetmachine.com
    WebSite:     https:\/\/www.kinetmachine.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey everyone, it\u2019s Jake here\u2014from the soil brick making machine crew, the guys who help construction … Can a soil brick making machine use recycled materials?<\/span>Read more<\/a><\/p>\n","protected":false},"author":207,"featured_media":3459,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3422],"class_list":["post-3459","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-soil-brick-making-machine-4920-13fea5"],"_links":{"self":[{"href":"http:\/\/www.mijin-design.com\/blog\/wp-json\/wp\/v2\/posts\/3459","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.mijin-design.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.mijin-design.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.mijin-design.com\/blog\/wp-json\/wp\/v2\/users\/207"}],"replies":[{"embeddable":true,"href":"http:\/\/www.mijin-design.com\/blog\/wp-json\/wp\/v2\/comments?post=3459"}],"version-history":[{"count":0,"href":"http:\/\/www.mijin-design.com\/blog\/wp-json\/wp\/v2\/posts\/3459\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.mijin-design.com\/blog\/wp-json\/wp\/v2\/posts\/3459"}],"wp:attachment":[{"href":"http:\/\/www.mijin-design.com\/blog\/wp-json\/wp\/v2\/media?parent=3459"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.mijin-design.com\/blog\/wp-json\/wp\/v2\/categories?post=3459"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.mijin-design.com\/blog\/wp-json\/wp\/v2\/tags?post=3459"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}